https://community.gopro.com/t5/en/What-Are-the-Voice-Control-Commands/ta-p/390204#
works for gopro max
GoPro Take a Photo
GoPro {Start|Stop} {Recording|Time Lapse}
https://community.gopro.com/t5/en/What-Are-the-Voice-Control-Commands/ta-p/390204#
works for gopro max
GoPro Take a Photo
GoPro {Start|Stop} {Recording|Time Lapse}
https://support.garmin.com/en-US/?partNumber=010-10997-09&tab=manuals
QT:{{”
Before you can pair the heart rate monitor with your device, you must put on the heart rate monitor.
…
For most Garmin compatible devices, bring the device within 3 m of the heart rate monitor and use the device menu to pair manually. For some Garmin compatible devices, bring the device within 1 cm of the heart rate monitor to pair automatically.
TIP: Stay 10 m away from other ANT+ sensors while pairing.
…
After you replace the heart rate monitor battery, you may need to pair it with the device again.
“}}
to change toner, 1st power down using the switch on the side, then:
QT:{{"
1. Press the cover release and open the printer’s top cover fully.
WARNING
If the printer has been powered on, the fuser may be hot. This area is clearly labelled. Do not touch.
2. Note the positions of the four cartridges. It is essential that they go back in the same order.
(a) Slide the colored release collar (1) on the cartridge to be replaced fully towards the right hand side of the printer.
…
"}}
Useful for a test print:
QT:{{"
How to Print the Menu Map __________
The Menu Map provides a listing of the current printer menu settings. To print one out:
1. Press the OK button.
2. Press the down arrow key to go to the Information Menu.
3. Press OK.
4. Press OK to select Print Menu Map.
The Menu Map prints and the printer goes back on line.
"}}
http://www.oki.com/us/printing/download/C330%20C530%20User%20Guide_31170.pdf?id=59321301