solo
https://connect.garmin.com/modern/activity/8050423346
12 mi & ~90′ roundtrip
group
https://connect.garmin.com/modern/activity/8609609736
2 hrs & 11 mi.
https://connect.garmin.com/modern/activity/9357430913
~5′ on 146 from Old Quarry Rd to Sawmill Rd.
After the train underpass, there’s a wide shoulder that narrows. It gets wider again around Medlyn Farms, until Sawmill.
After the train underpass, there’s also a place to park.
Whole ride is ~13 mile & 90′.
From start, it’s ~23′ to the end of Sawmill Rd. (but using 146 not turn offs) Quarry Road extension takes ~25′ (from 146 & back to it).
4 July swim
garmin water temp. of 69 F
https://connect.garmin.com/modern/activity/5187380898
Screen Shot 2021-01-14 at 10.36.56 PM
20 Dec. 2020 skiing
Screen Shot 2021-01-14 at 10.02.27 PM
27 Nov. 2020 Swim
Temp. in F
58 – air
55 – water
49 – garmin (wrist)
calm:
low tide at 3 pm w/ 72 tidal coeff
3.3 ft wave height
wind 3 mph
https://connect.garmin.com/modern/activity/5882338939
Screen Shot 2021-01-14 at 10.01.17 PM
1 Nov. Swim
Screen Shot 2021-01-14 at 9.59.41 PM
21 Nov. Swim
Temp. in F
57 – water
51 – garmin (wrist)
60 – air
wind at 7 mph
https://connect.garmin.com/modern/activity/5854585252
Screen Shot 2021-01-14 at 8.05.37 PM.png
]what eventually works:
login to garmin => go to calendar => connect microsoft acct (personal (non-institutional) outlook)
=> publishing in ms to get URL => paste URL into gcal (updates slowly, est. once a day)
Note, it’s also possible to create new activities, like “tennis” & have these entered into the gcal too, creating a nice “activities diary” in the gcal.
https://support.garmin.com/en-US/?partNumber=010-10997-09&tab=manuals
QT:{{”
Before you can pair the heart rate monitor with your device, you must put on the heart rate monitor.
…
For most Garmin compatible devices, bring the device within 3 m of the heart rate monitor and use the device menu to pair manually. For some Garmin compatible devices, bring the device within 1 cm of the heart rate monitor to pair automatically.
TIP: Stay 10 m away from other ANT+ sensors while pairing.
…
After you replace the heart rate monitor battery, you may need to pair it with the device again.
“}}